http://www.begraphic.com/forum/ |
|
Gauge ranges are incorrectly labeled as percents http://www.begraphic.com/forum/viewtopic.php?f=17&t=152 |
Page 1 of 1 |
Author: | glcklsmith [ Sun Jun 05, 2011 6:19 pm ] |
Post subject: | Gauge ranges are incorrectly labeled as percents |
I have a spreadsheet with about 20 gauges. I updated previous monthly data (that had no issues) with new data. After I updated the gauges about half of the gauges had the gauge range changed to a percent (100%, 200%, etc) from a number (1, 2, etc). I verified that the data for the gauge range is numerical and even deleted and re-created a gauge to no avail. The alert ranges are still as before (1-2 green, 2-5 red, etc) and the current value is correctly pointing to the right tick mark (although it is in percent). Any thoughts?????? |
Author: | BeGraphic Team [ Mon Jun 06, 2011 2:02 pm ] |
Post subject: | Re: Gauge ranges are incorrectly labeled as percents |
Dear BeGraphic user Can you please send me your file. With this file I can solve this problem more efficiently Best regards BeGraphic's team |
Author: | robdigital [ Wed Jun 15, 2011 3:08 pm ] |
Post subject: | Re: Gauge ranges are incorrectly labeled as percents |
I am now having the exact same issue. Is there a fix? |
Author: | robdigital [ Wed Jun 15, 2011 3:46 pm ] |
Post subject: | Re: Gauge ranges are incorrectly labeled as percents |
I have more information on the bug; If you have multiple guages (say # 1 to 10) and you have the scales set to automatic or manual (but not a percentage), and the target (value return) cells are formated for 'number', then everything works as intended. However, lets say you set gauge # 5 to reference a cell that is formated as a %, as soon as you update animations, all subsequent guages (#6-10) will all switch to a perentage display regardless if they are in automatic or manual mode. |
Author: | robdigital [ Wed Jun 15, 2011 5:35 pm ] |
Post subject: | Re: Gauge ranges are incorrectly labeled as percents |
Temporary fix: You will need to change your formulas and cell formating to have the gauges display correctly. example; Before cell a1 = 50 cell a2 = 100 cell b2 = A1/A2 (formated as percent) = 50% After Cell b2 = (A1/A2)*100 (formated as number with 0 decimal places) = 50 and in the guage setup, enable advanced mode, In scale select 'with scale' and in graduation's unit type % kind of a pain to go through and edit a few hundred formulas and update parameters on 65+ guages but it's the only solution I have found. |
Author: | BeGraphic Team [ Fri Jun 17, 2011 8:25 am ] |
Post subject: | Re: Gauge ranges are incorrectly labeled as percents |
Dear BeGraphic user We have reproduce the problem you encountered, and working on a solution. We will keep you informed when the problem will be solved. Best regards |
Author: | BeGraphic Team [ Fri Jun 17, 2011 2:14 pm ] |
Post subject: | Re: Gauge ranges are incorrectly labeled as percents |
Dear BeGraphic user A new version correcting this problem is available on http://www.begraphic.com/download.html Best regards BeGraphic's team |
Author: | HowarJK8 [ Wed Apr 15, 2015 11:08 am ] |
Post subject: | Re: Gauge ranges are incorrectly labeled as percents |
Every time I attempt and make a gage or any visual it says "Ths part must be accesed for a gathering". Why am I getting this blunder? |
Page 1 of 1 | All times are UTC |
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |